Guide · Homeowners · 4 min read · Updated 17 November 2026
How Is a Media Wall Built? Step-by-Step Process Explained
Short answer
A media wall is built by framing a false wall in timber or metal stud in front of the existing wall, running cables and fixing noggins for the TV, boarding it with plasterboard, forming the TV recess, fire opening and niches with corner bead, then taping, filling and sanding the joints. The fire is fitted last. Most walls take two to five days.
Step 1: Survey and design
The installer measures the wall, ceiling height and floor, checks for skirting, radiators, sockets and windows, and confirms the TV size, the TV bracket, the fire model and any soundbar or speakers. The fire and TV dimensions decide the size of every opening, so they need to be fixed before framing starts. A drawing or mock-up shows the recess, niches, LED channels and sockets, with the TV centred at a comfortable viewing height.
This is also the time to decide on finishes. A painted wall is the simplest, while slatted panels or cladding change the depth of the wall and need allowing for in the framing. If there is a radiator on the wall, it may need moving, which brings in a plumber.
Step 2: Framing
The frame is built from treated timber, commonly around 47 by 75 mm, or from metal C-studs and track. Head and sole plates are fixed to the ceiling and floor, then vertical studs are set out to form the recesses, niches and fire opening. Noggins, short horizontal pieces between studs, are added wherever the TV bracket, shelves or the fire will be fixed, because plasterboard alone cannot safely hold a heavy TV.
Metal stud is straight and light and does not twist, which suits very large walls. Timber is quicker to cut on site and easier to fix into. Either works if it is fixed securely and set out accurately.
Fixing matters as much as material. On a concrete floor, the sole plate is fixed with masonry fixings; on a suspended timber floor, it is fixed into joists where possible. At the top, the head plate is fixed through the ceiling into joists, not just into plasterboard, so the frame cannot move when the TV is pulled out on an articulating bracket.
- Head and sole plates fixed to ceiling and floor
- Studs at regular centres to suit 1,200 mm plasterboard sheets
- Noggins or plywood backing behind the TV bracket
- Opening framed to the fire's installation dimensions
- Recesses and niches set out level and symmetrical
Step 3: First-fix electrics
Before boarding, the electrician runs cables to back boxes behind the TV, inside niches and near the fire. A fused spur is installed for the fire so it can be isolated for servicing. Conduit is run from the TV recess to a low niche or cupboard so HDMI and network cables can be pulled through later. LED drivers are positioned where they can be reached after the wall is finished, often inside a niche or behind a removable panel.
Electrical work must comply with BS 7671. Where a new circuit is added in England or Wales, Part P of the Building Regulations applies, so the electrician either self-certifies through a competent person scheme or the work is notified to Building Control.
Step 4: Boarding and forming the openings
Plasterboard sheets, typically 12.5 mm thick, are screwed to the frame, with joints staggered so they do not line up across the wall. Inside the fire opening, the installer uses the board or lining the fire manufacturer specifies, as some fires require particular clearances or materials around the fire box. Metal corner beads are fixed along every external corner of the recesses and niches to give sharp, straight edges that resist knocks.
LED channels, if used, are routed or recessed into the board edges at this stage so the light strip sits flush and the diffuser hides individual LEDs.
Where the wall sits against an external wall, some installers add insulation between the studs or use insulated plasterboard, which can make the room feel warmer and reduce cold spots behind the TV.
Step 5: Taping, filling and sanding
The joints are taped and filled with jointing compound in several coats, each allowed to dry before the next. Screw heads are spotted over. After the final coat, the wall is sanded smooth and checked under a raking light, which shows up ridges and hollows that would be visible once painted. On media walls this stage matters more than usual, because dark paint and LED lighting both exaggerate any imperfection.
Some installers skim the whole wall with finishing plaster instead of taping and filling. A skim gives a very uniform surface but needs longer to dry before decorating.
| Stage | Typical time | Notes |
|---|---|---|
| Survey and design | Before work starts | TV and fire models confirmed |
| Framing and first-fix electrics | Day 1 | Noggins, conduit and back boxes |
| Boarding and corner beads | Day 1 to 2 | Openings formed and checked |
| Filling and sanding | Day 2 to 3 | Several coats, drying time between |
| Fire fit and second fix | Final day | Sockets, fire and LEDs connected |
| Decorating | After drying | Mist coat then top coats |
Step 6: Second fix and finishing
Once the wall is finished, the electrician fits sockets and switches, connects LED drivers and tests the circuits. The fire is slid into its opening, connected to the fused spur and secured following the manufacturer's instructions. The TV bracket is fixed into the noggins and the TV hung. The wall is then decorated, starting with a diluted mist coat on new plaster or filler to seal it before the top coats. We arrange each stage through vetted, insured trades, so one team carries the job from framing to the final test.
Questions people also ask
Is a media wall made of plasterboard strong enough for a TV?
Not by plasterboard alone. A properly built media wall has timber noggins or a plywood backing behind the TV position, and the bracket is fixed through the board into that solid support. Ask your installer what the TV bracket will be fixed into and make sure it is rated for your TV's weight.
How deep is a media wall?
Most media walls project roughly 150 to 300 mm from the original wall, depending on the fire depth and whether the TV is recessed. Inset electric fires set the minimum depth, so the fire's specification usually decides it. A deeper wall takes up more floor space, which matters in smaller living rooms.
Do I need to be at home while a media wall is built?
You do not need to be in the room all day, but someone should be available at the start to confirm positions, and at the end to check the finish and the fire working. Expect some dust during sanding; installers usually sheet floors and furniture and use extraction where possible.
Written and checked by the Media Wall Builders team. Read our editorial policy.
More guides
How Much Does a Media Wall Cost in the UK?
A standard media wall up to 3 metres wide, with a TV recess, fire opening and tape-and-fill finish, costs £1,400–£2,600, excluding the fire. Larger…
Choosing an Electric Fire for a Media Wall: Sizes and Safety
Choose the electric fire before the media wall is designed, because the opening, depth and ventilation are built around it. Inset letterbox fires…
Media Wall TV Height and Recess Size: How to Get It Right
On a media wall, aim for the centre of the TV to sit roughly at seated eye level, usually around 1 to 1.2 metres from the floor, adjusted for the…
DIY Media Wall vs Professional Build: What You Need to Know
A confident DIYer can frame and board a simple media wall, but most people underestimate the finishing and the electrics. New sockets and spurs must…
Get a free media wall builders quote
Tell us what you need and we'll come back with a clear price.
Request a quote