Media Wall Builders

Media Wall Builders

Media Wall Alterations and Removals

Resizing TV recesses for a new screen, swapping fires, repairing cracks or removing an old media wall and making good.

Free Media Wall Builders quote

No obligation. We only use your details to reply about this job.

Media Wall Alterations and Removals — Media Wall Builders

What's involved

Media walls often need changing when a bigger TV arrives or a fire fails. The fitter opens the plasterboard around the recess, adjusts the stud frame, adds new noggins and reboards, then tapes and fills to blend with the existing wall. Swapping a fire for one of a different size means reframing the opening. Hairline cracks at board joints are usually caused by missing tape, poor fixings or a frame that moves, and are fixed by cutting out and retaping the joint. Full removal involves stripping the boards and frame, capping off cables and repairing the original wall and floor. Most alterations take one to two days, removals a day. You need the new TV or fire model available so measurements are exact.

How we handle it

  1. Send us your plan

    Use the quote form to share the wall width and height, TV size, fire model if chosen and any feature ideas. Photos of the room and wall help us match you with the right fitter.

  2. Design and price

    A local fitter visits to measure, check the existing wall and power, and agree the TV height, fire position and niche layout. You receive a fixed written price.

  3. Frame and first fix

    The stud frame goes up with noggins where needed, and the electrician runs cables, conduit and back boxes before any boards are fitted.

  4. Board and finish

    Plasterboard is fixed, joints are taped and filled or the wall is skimmed. Fire and LED channels are installed and the wall is left to dry ready for painting.

  5. Fit, test and hand over

    Sockets go on, the fire and lights are connected and tested, the TV is mounted if supplied, and you receive the electrical certificate and a tidy room.

Price guide

Media wall prices depend on the width and height of the wall, the number of niches, the finish and how much electrical work is needed. The fire and TV are usually bought separately, though fitters can supply fires. Every quote is fixed after a site visit and states clearly what is and is not included.

  • Large media wall with niches: £2,600–£4,500. Wider or full-height walls with side niches, shelving and LED channels.
  • Electric fire supply and fit: £450–£1,500. Inset letterbox fire from 1000 to 1800 mm, fitted and connected to a fused spur.
  • Sockets, conduit and cabling: £250–£600. Behind-TV sockets, HDMI conduit and equipment cupboard power, tested and certified.

Questions about media wall alterations and removals

What is a media wall?

A media wall is a false wall built in front of an existing wall to house a TV, usually with an inset electric fire, shelving niches and LED lighting. It is framed in timber or metal stud, boarded with plasterboard and finished for painting. All cables are hidden inside, which gives a clean, built-in look.

How much does a media wall cost in the UK?

A standard media wall up to three metres wide typically costs £1,400 to £2,600 for the build, excluding the fire. Larger walls with niches and LED lighting run £2,600 to £4,500. An inset electric fire adds £450 to £1,500 supplied and fitted. Feature finishes such as slatted panels add more.

How long does it take to build a media wall?

Most media walls take three to five days. Day one is framing and first fix electrics, day two boarding, and the following days taping, filling or skimming and drying. Fire, sockets and lights go in once the finish is dry. Paint is applied once the filler or plaster has fully cured.

Get a free media wall builders quote

Tell us what you need and we'll come back with a clear price.

Request a quote