Media Wall Builders

Media Wall Builders

TV Recess and Mounting

Recessing the TV flush into the wall or mounting it on a heavy-duty bracket, with noggins and back boxes for power and HDMI.

Free Media Wall Builders quote

No obligation. We only use your details to reply about this job.

TV Recess and Mounting — Media Wall Builders

What's involved

A recessed TV sits 50 to 100 mm back into the wall so the screen is almost flush. The fitter builds a pocket slightly larger than the TV, leaving space for ventilation and to lift the set off its bracket. Behind the screen go a double socket, an aerial or satellite outlet and a brush plate for HDMI, all in recessed boxes so nothing pushes the TV forward. Solid noggins or a ply backing board carry the bracket, as plasterboard alone cannot hold a 30 kg television. Articulated brackets need deeper recesses. A TV recess adds about half a day to the frame. You must give the exact model of the TV and bracket, since sizes vary even between screens advertised at the same diagonal.

How we handle it

  1. Send us your plan

    Use the quote form to share the wall width and height, TV size, fire model if chosen and any feature ideas. Photos of the room and wall help us match you with the right fitter.

  2. Design and price

    A local fitter visits to measure, check the existing wall and power, and agree the TV height, fire position and niche layout. You receive a fixed written price.

  3. Frame and first fix

    The stud frame goes up with noggins where needed, and the electrician runs cables, conduit and back boxes before any boards are fitted.

  4. Board and finish

    Plasterboard is fixed, joints are taped and filled or the wall is skimmed. Fire and LED channels are installed and the wall is left to dry ready for painting.

  5. Fit, test and hand over

    Sockets go on, the fire and lights are connected and tested, the TV is mounted if supplied, and you receive the electrical certificate and a tidy room.

Price guide

Media wall prices depend on the width and height of the wall, the number of niches, the finish and how much electrical work is needed. The fire and TV are usually bought separately, though fitters can supply fires. Every quote is fixed after a site visit and states clearly what is and is not included.

  • Electric fire supply and fit: £450–£1,500. Inset letterbox fire from 1000 to 1800 mm, fitted and connected to a fused spur.
  • Large media wall with niches: £2,600–£4,500. Wider or full-height walls with side niches, shelving and LED channels.
  • Standard media wall, up to 3 m wide: £1,400–£2,600. Stud frame, plasterboard, TV recess, fire opening and tape-and-fill finish, excluding fire.

Questions about tv recess and mounting

Why do media walls crack?

Media walls crack at board joints when the joints were not taped, the frame was not fixed firmly, or the timber moved as it dried. Heat from a fire can make this worse. Using dry timber, scrim tape, correct screw spacing and a full skim finish greatly reduces the risk. Small cracks can be cut out and retaped.

How much does a media wall cost in the UK?

A standard media wall up to three metres wide typically costs £1,400 to £2,600 for the build, excluding the fire. Larger walls with niches and LED lighting run £2,600 to £4,500. An inset electric fire adds £450 to £1,500 supplied and fitted. Feature finishes such as slatted panels add more.

Can a media wall be built in a new-build house?

Yes, and new builds are well suited because they often lack a chimney breast and have plasterboard walls that make fixing straightforward. The fitter checks for pipes and cables in the existing wall, frames the media wall in front and fixes it to floor joists or concrete and ceiling joists.

Get a free media wall builders quote

Tell us what you need and we'll come back with a clear price.

Request a quote