Media Wall Builders

Media Wall Builders

LED Lighting and Feature Finishes

Recessed LED channels, backlit niches, slatted timber panels, stone-effect cladding and other finishes that make the wall stand out.

Free Media Wall Builders quote

No obligation. We only use your details to reply about this job.

LED Lighting and Feature Finishes — Media Wall Builders

What's involved

Lighting turns a media wall into a feature. LED strip sits in aluminium channels with diffusers, recessed into the edge of niches or along the shadow gap above the fire, so you see a soft glow rather than individual dots. Colour-changing RGB strips need a controller and a wireless remote or app. Finishes include acoustic slatted oak panels, which also absorb some echo, porcelain or marble-effect panels around the fire, and textured paints. Heavy cladding such as stone tiles needs cement board rather than plasterboard behind it. These extras add one to two days to a standard build. You need to pick finishes before boarding, because some cladding needs a different substrate or extra framing depth.

How we handle it

  1. Send us your plan

    Use the quote form to share the wall width and height, TV size, fire model if chosen and any feature ideas. Photos of the room and wall help us match you with the right fitter.

  2. Design and price

    A local fitter visits to measure, check the existing wall and power, and agree the TV height, fire position and niche layout. You receive a fixed written price.

  3. Frame and first fix

    The stud frame goes up with noggins where needed, and the electrician runs cables, conduit and back boxes before any boards are fitted.

  4. Board and finish

    Plasterboard is fixed, joints are taped and filled or the wall is skimmed. Fire and LED channels are installed and the wall is left to dry ready for painting.

  5. Fit, test and hand over

    Sockets go on, the fire and lights are connected and tested, the TV is mounted if supplied, and you receive the electrical certificate and a tidy room.

Price guide

Media wall prices depend on the width and height of the wall, the number of niches, the finish and how much electrical work is needed. The fire and TV are usually bought separately, though fitters can supply fires. Every quote is fixed after a site visit and states clearly what is and is not included.

  • Slatted panel or cladding finish: from £350. Acoustic oak slats or stone-effect panels on part of the wall, depending on area.
  • Sockets, conduit and cabling: £250–£600. Behind-TV sockets, HDMI conduit and equipment cupboard power, tested and certified.
  • Electric fire supply and fit: £450–£1,500. Inset letterbox fire from 1000 to 1800 mm, fitted and connected to a fused spur.

Questions about led lighting and feature finishes

Can a media wall be removed later?

Yes. Because it is a stud wall in front of the original, a media wall can be stripped out in a day. Cables are made safe or capped, the frame is removed and the original wall and ceiling are repaired where fixings went in. The room returns to roughly its previous size.

Is it safe to put a TV above an electric fire?

Yes, if the fire is designed for it and the manufacturer's clearances are followed. Many electric fires blow warm air forward or down, but some vent upwards. Leave the recommended gap, often 300 mm or more, and avoid placing the TV directly in the heater's airflow. The flame effect alone gives off very little heat.

What is a media wall?

A media wall is a false wall built in front of an existing wall to house a TV, usually with an inset electric fire, shelving niches and LED lighting. It is framed in timber or metal stud, boarded with plasterboard and finished for painting. All cables are hidden inside, which gives a clean, built-in look.

Get a free media wall builders quote

Tell us what you need and we'll come back with a clear price.

Request a quote