Media Wall Builders

Media Wall Builders

Cable Management and Electrics

Sockets, conduit, HDMI runs and LED drivers installed so all cables are hidden and can be replaced later without opening the wall.

Free Media Wall Builders quote

No obligation. We only use your details to reply about this job.

Cable Management and Electrics — Media Wall Builders

What's involved

Good cable management means you never see a wire. An electrician extends a nearby ring or adds a spur to new sockets behind the TV and in the cupboards for set-top boxes, consoles and routers. A 40 or 50 mm conduit runs from the equipment cupboard to behind the TV so HDMI and network cables can be pulled through and swapped later. LED strip drivers are placed where they can be reached for replacement, not sealed behind plasterboard. Electrical work must meet BS 7671 and is tested and certified on completion. Allow a day for first fix and half a day for second fix after plastering. You need to decide which devices will live in the wall so enough sockets and outlets are provided.

How we handle it

  1. Send us your plan

    Use the quote form to share the wall width and height, TV size, fire model if chosen and any feature ideas. Photos of the room and wall help us match you with the right fitter.

  2. Design and price

    A local fitter visits to measure, check the existing wall and power, and agree the TV height, fire position and niche layout. You receive a fixed written price.

  3. Frame and first fix

    The stud frame goes up with noggins where needed, and the electrician runs cables, conduit and back boxes before any boards are fitted.

  4. Board and finish

    Plasterboard is fixed, joints are taped and filled or the wall is skimmed. Fire and LED channels are installed and the wall is left to dry ready for painting.

  5. Fit, test and hand over

    Sockets go on, the fire and lights are connected and tested, the TV is mounted if supplied, and you receive the electrical certificate and a tidy room.

Price guide

Media wall prices depend on the width and height of the wall, the number of niches, the finish and how much electrical work is needed. The fire and TV are usually bought separately, though fitters can supply fires. Every quote is fixed after a site visit and states clearly what is and is not included.

  • Large media wall with niches: £2,600–£4,500. Wider or full-height walls with side niches, shelving and LED channels.
  • Standard media wall, up to 3 m wide: £1,400–£2,600. Stud frame, plasterboard, TV recess, fire opening and tape-and-fill finish, excluding fire.
  • Media wall alteration: £300–£900. Resizing a TV recess, swapping a fire or repairing cracked joints in an existing wall.

Questions about cable management and electrics

How much does a media wall cost in the UK?

A standard media wall up to three metres wide typically costs £1,400 to £2,600 for the build, excluding the fire. Larger walls with niches and LED lighting run £2,600 to £4,500. An inset electric fire adds £450 to £1,500 supplied and fitted. Feature finishes such as slatted panels add more.

Why do media walls crack?

Media walls crack at board joints when the joints were not taped, the frame was not fixed firmly, or the timber moved as it dried. Heat from a fire can make this worse. Using dry timber, scrim tape, correct screw spacing and a full skim finish greatly reduces the risk. Small cracks can be cut out and retaped.

How deep does a media wall need to be?

A media wall is usually 200 to 400 mm deep. The depth is set by the fire, as most inset electric fires need 150 to 250 mm, plus framing. A deeper wall allows a flush TV recess and space for equipment. In smaller rooms, a slim fire and shallow recess keep the wall from dominating.

Get a free media wall builders quote

Tell us what you need and we'll come back with a clear price.

Request a quote