Media Wall Builders glossary
The terms you'll come across, explained in plain English.
- Back box
- The metal or plastic box set into a wall behind a socket or switch, holding the wiring and the accessory securely.
- Cable conduit
- A tube run inside the wall between the TV and equipment area so HDMI and other cables can be pulled through or replaced later.
- Corner bead
- A metal or plastic angle strip fixed along external corners before filling, giving sharp, straight edges that resist knocks.
- Fused spur
- A switched outlet with a fuse that permanently connects an appliance such as an electric fire to a circuit and allows it to be isolated.
- Inset electric fire
- An electric fire designed to be recessed into a wall opening so only the glass front and flames are visible.
- LED channel
- A recessed aluminium profile holding an LED strip behind a diffuser, giving an even line of light around recesses and niches.
- Letterbox fire
- A long, shallow, landscape-shaped electric fire commonly used in media walls, often between 1,000 and 1,800 mm wide.
- Media wall
- A false wall built in front of an existing wall to house a TV, an inset electric fire, shelving niches, LED lighting and hidden cables.
- Metal C-stud
- A lightweight galvanised steel section shaped like a C, used with matching track to frame straight, stable stud walls.
- Mist coat
- A first coat of watered-down emulsion applied to new plaster or filler to seal it so later coats of paint bond properly.
- Noggin
- A short horizontal piece of timber fixed between studs to stiffen the frame and provide solid fixing points for TV brackets and shelves.
- Plasterboard
- Sheets of gypsum plaster faced with paper, commonly 12.5 mm thick, screwed to the stud frame to form the wall surface.
- Skim coat
- A thin layer of finishing plaster applied over the whole board surface for a uniform finish, as an alternative to tape and fill.
- Stud wall
- A wall made of a framework of vertical timber or metal studs fixed between top and bottom plates, then covered in plasterboard.
- Tape and fill
- A finishing method where plasterboard joints are covered with tape and several coats of jointing compound, then sanded smooth for painting.
Get a free media wall builders quote
Tell us what you need and we'll come back with a clear price.
Request a quote