Aberdeen · Scotland
Media Wall Builders in Aberdeen
We help households in Aberdeen, Inverurie and Peterhead get a fixed price for a properly built media wall.
Where we work around Aberdeen
We cover all of Aberdeen and the wider Aberdeen area. Postcodes we cover here include AB21, AB24, AB15, AB12, AB11 and AB10. Nearby places we also cover include Cults, Kingswells, Aberdeen City and Bieldside.
Media Wall Builders in Aberdeen: local know-how
In Aberdeen flats, fitters bring boards up stairwells and lifts, so 1200 mm wide sheets may be cut to size before going in. Concrete walls in Aberdeen apartment blocks need specialist fixings for media wall frames and heavy TV brackets.
In Scotland, building warrants are issued by the local council, and much of the older stock is stone-built with harling or render. Lath-and-plaster walls in period Aberdeen properties are poor for fixings, so the media wall frame carries all the weight. Coastal homes around Aberdeen can suffer damp outside walls, so a well-ventilated cavity behind the media wall is sensible. Building warrants from Aberdeen are not normally needed for a simple media wall, but larger alterations in Scottish homes may need checking.
What we can do in Aberdeen
LED Lighting and Feature Finishes
Recessed LED channels, backlit niches, slatted timber panels, stone-effect cladding and other finishes that make the wall stand out.
Media Wall Alterations and Removals
Resizing TV recesses for a new screen, swapping fires, repairing cracks or removing an old media wall and making good.
Full Media Wall Builds
Floor-to-ceiling media walls with TV recess, electric fire inset, side niches and hidden cables, finished ready for decorating.
Electric Fire Installation
Inset and wall-mounted electric fires fitted into media walls with correct clearances, ventilation and a dedicated fused supply.
TV Recess and Mounting
Recessing the TV flush into the wall or mounting it on a heavy-duty bracket, with noggins and back boxes for power and HDMI.
Cable Management and Electrics
Sockets, conduit, HDMI runs and LED drivers installed so all cables are hidden and can be replaced later without opening the wall.
Typical costs in Aberdeen
- Standard media wall, up to 3 m wide: £1,400–£2,600. Stud frame, plasterboard, TV recess, fire opening and tape-and-fill finish, excluding fire.
- Media wall alteration: £300–£900. Resizing a TV recess, swapping a fire or repairing cracked joints in an existing wall.
- Slatted panel or cladding finish: from £350. Acoustic oak slats or stone-effect panels on part of the wall, depending on area.
Prices are a guide. Your quote for Aberdeen is a fixed price based on the details you give us. Full price guide.
Media Wall Builders questions from Aberdeen
How do I get a media wall quote in Aberdeen?
Use our quote form with your Aberdeen postcode, wall size, TV size and fire choice if known. Photos help. A local fitter will visit and provide a fixed written price.
Do I need permission for a media wall in Aberdeen?
No planning permission is needed for an internal media wall in Aberdeen. Electrical work must be certified. If your home is listed, check with Aberdeen before altering original walls or fireplaces.
Can you alter my existing media wall in Aberdeen?
Yes. Fitters in Aberdeen can resize a TV recess for a bigger screen, swap a fire, add lighting or repair cracked joints. Most alterations take one to two days.
Can you add a media wall to a new build in Aberdeen?
Yes. New builds in Aberdeen are well suited to media walls, especially where there is no chimney breast. The fitter checks the existing wall for services before fixing the frame.
Do I need planning permission for a media wall?
No, a media wall inside your home does not need planning permission. Electrical work must meet BS 7671, and new circuits must be certified. Listed buildings may need consent for alterations to historic walls or fireplaces, so check with your local authority if your home is listed.
How long does it take to build a media wall?
Most media walls take three to five days. Day one is framing and first fix electrics, day two boarding, and the following days taping, filling or skimming and drying. Fire, sockets and lights go in once the finish is dry. Paint is applied once the filler or plaster has fully cured.
Helpful guides
How Is a Media Wall Built? Step-by-Step Process Explained
A media wall is built by framing a false wall in timber or metal stud in front of the existing wall, running cables and fixing noggins for…
Read the guide →DIY Media Wall vs Professional Build: What You Need to Know
A confident DIYer can frame and board a simple media wall, but most people underestimate the finishing and the electrics. New sockets and…
Read the guide →Get a free media wall builders quote in Aberdeen
Tell us what you need and we'll come back with a clear price.
Request a quote